Shut - Off Valve Air Operated Double Diaphragm Pump Aluminum Alloy
Pheumatic Membrane Pump Features:
1. Air driven.
2.The pump can not over heating, and no harmful gas discharged.
3. No electric spark.
4. Bigger solids also can be passed and no block.
5. Do not damage solids.
6. Has suction ability.
7. Can empty running without risk.
8. Can works under water.
9. Widely usage, even for the viscous materials.
10. No complicated control system and easy to operate.
11. Compact design and lighter, easy to be moved.
12. Easy to maintain.
13. Good self priming performance
14. Convey all kinds of medium
15. Material:Cast steel,Alu,SS,PP
Air diaphragm pump(also know as a Membrane pump, air operated double diaphragm pump(AOOD) or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a
rubber,thermoplastic or diaphragm and suitable valves either side
of the diaphragm (check valve,butterfly valves,flap valves,or any
other form of shut-off valves) to pump a fluid.
| Item | Description | Unit | Reference Figure |
| 1 | Maximum air inlet pressure | Mpa | 0.83 |
| 2 | Maximum flow rate | L/Min | 192 |
| 3 | Maximum lift | M | 70 |
| 4 | Maximum outlet pressure | Mpa | 0.83 |
| 5 | Maximum particle size | mm | 3 |
| 6 | Weight | kg | 12.3 |
| 7 | Noise level | db | ＜70 |
AODD Pumps can deal with all kinds of corrosive, volatile,
flammable, poisonous fluids with particles and high viscosity.
1.The pump can suck the peanut, pickles, tomato slurry, red
sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain,
brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent
and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility
liquid etc.
6. The pump can suck various wedge water, cement slurry and mortar
etc.
7. The pump can suck various strong acid, alkali and corrosive
liquid etc.
8. It can be used as a front-step tranmission device of the solid
and liquid separation equipmen
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ·······································40°- 150°F (4.4-
65.5°C)
Santoprene·································-40°- 225°F (-40°-
107.2°C)
·········································40°- 220°F (4.4°- 104°C)
Nitrile··········································10°- 180°F (-12°-
82°C)
Viton···········································-40°- 350°F
(-40°-176.6°C)
Hytrel············································-20°-150°F (-12°-
93°C) Kynar···········································10°-200°F
(-28.9°- 65.5°C) Polypropylene································32°-
175°F (0-79.4°C)
1” Flow diagram
